How to behave on an unfamiliar reservoir -, Kyrgyzstan – Tourist blog

Before putting a tent, you need to carefully examine spaces near the reservoir and, accordingly, analyze deep places for security purposes, if you relax with children. After that, slowly go along the coast and see where the fish plays, remember the shallow places with vegetation and corygami. The main and important factor is the study of the bottom of the reservoir, its depths and places where there are pits. To study the bottom of the reservoir, it is necessary to throw the load on the presumptive location of fish and slowly pull it away, depending on the movement loaded on the bottom. If the load stretches with jumps, it means the bottom of the reservoir is uneven or stony. The load goes along the bottom exactly without jumps, then the bottom of the reservoir is sandy or clay. If the load stretches hard and the clay pieces remained on the ship, it means that the bottom consists of soft clay or conditions. Checking the bottom throughout the water and choosing an estimated place for fishing, you can go to the measurement of the depth, throwing the float fishing rod with the depth aroused. If when casting the float lies on the water, then it is necessary to reduce the depth.

Having placed the depth by putting the bait and bachinously fish, you can start catching the fish. In some reservoirs there is a flow, check the speed and direction of the flow is very simple, enough to throw a piece of bread into the water. Having calculated about the direction of the flow and the depth of the reservoir, the bait rushes according to the direction of the flow, respectively, to achieve the selected place for fishing. There are even additional visual signs of determine the depth of the reservoir. Small plots of reservoir, look lighter compared to deep, it can be determined by the naked eye, if you look at a high point above the reservoir.